CERAMOL 258 - Water based refractory paint
CERAMOL 258 - Water based refractory paint
Couldn't load pickup availability
Product Description
Water based ceramic coating for the prevention of metal adhesion and penetration in all ferrous and non-ferrous alloys.
Application
CERAMOL* 258 is a zircon silicate coating with special additives which prevent, to a large extent, the adhesion and penetration of molten metals. CERAMOL* 258 can be used to protect crucibles during pouring and transport ladles prolonging the service life. Furnace tools and cast iron tipper ladles can also be coated in CERAMOL* 258, the coated items are practically in as-new condition at each filling.
CERAMOL* 258 can be used in ferrous castings to protect against metal penetration and burn on in any hot spot area, including riser contact and chromite faced areas.
Properties
CERAMOL* 258 is supplied ready for use. It can be diluted with water if required to improve the application properties and is best applied by brush, swab, spray or dip, extra dilution with water may be required for spray or dip application. For furnace tools and all refractories the best results are achieved by heating the surface to a maximum temperature of 100°C. Above this temperature there may be issues with the CERAMOL* 258 not adhering correctly, as the steam escaping from the CERAMOL* 258 while drying will disrupt the bonding. Thick coating layer can be achieved by multiple applications, allowing the coating to dry between applications. CERAMOL 258 can be applied to any bonded sand surface by brush as supplied; CERAMOL 258 must be dried thoroughly before coming in contact with molten metal.
Collapsible content
Safety & Data
Shipping Info
The vast majority of our orders arrive at location within the week but please allow up to 2 weeks due to Murphy's Law. We at MeltCraft Australia take customer service very seriously and make every endeavour to ensure that you receive your order safely and speedily.
We use AusPost primarily as our means of getting the order to your door. Shipping costs are calculated at check out based on total weight in kilograms. Some of our larger, heavier items such as our Greensand Kits must be couriered. We will generally use Startrack in this case.
Some of our stocked items are kept in warehouses at different locations within Australia. Items that you have ordered may be shipped separately and arrive sooner or later than others. The important fact is is that they all will get there.
We accept 14 day returns on tools and furnace accessories ONLY. The item/s must be in new condition and unblemished, preferably with intact packaging and any product documentation. Return postage and costs associated with the return is to be incurred by the buyer.